Writing, Formatting, and Page Layout

This guide teaches the everyday craft of a document: getting words on the page, making them look right, and controlling how the page itself is laid out. After it you will be able to place your caret precisely, apply headings and named styles that keep a long document consistent, and set page size, margins, columns, and section breaks for a professional deliverable. Every step here is the real editor, and none of it requires knowing a markup language.

The Editing Surface and Its Three Modes

After this section you will know how to write, where your caret goes, and how to switch between editing, suggesting, and read-only. A document opens in the editor as a formatted page. You type directly on it, and the toolbar and the Format menu apply formatting to your selection or at the caret.

A selector at the top right sets how you interact with the document:

  • Editing makes your changes directly to the document.
  • Suggesting records your changes as tracked suggestions an author can accept or reject, rather than applying them outright. This is the redlining mode, covered in Tracked Changes.
  • Viewing is read-only: you can read and navigate without any risk of changing the text.

The modes available to you match your access to the document. Someone with edit access sees all three; someone shared in with comment or view access sees the modes their access allows. Sharing and access levels are covered in Collaboration and Sharing.

One small thing that matters more than it sounds: you can click anywhere to place the caret, including the margin, past the end of a short line, or below the last line of text. The editor drops the caret where you clicked, the way a familiar word processor does, so you are never fighting the page to type where you mean to.

Do I have to save my work? No. Every change is written to the live copy as you make it. There is no Save button and nothing is lost if your connection drops or you close the tab; your document is where you left it when you come back. Version history (see Importing and Exporting) keeps named and automatic snapshots you can return to.

Text Formatting: Marks and Fonts

After this section you will be able to apply every character-level format a professional document needs. Select text and apply it from the toolbar or the Format menu:

  • Emphasis: bold, italic, underline, and strikethrough.
  • Scientific notation: superscript and subscript for units, footnote marks, and chemical or mathematical notation.
  • Font family and size, text color, and highlight color.
  • Typographic effects: small caps and related effects for headings and title pages.

Formatting applies to whatever is selected, or, if nothing is selected, to what you type next from the caret.

Named Styles and Linked Styles

After this section you will keep a long document consistent without formatting each heading by hand. Instead of manually bolding and resizing every heading, apply a named style, Heading 1, Heading 2, a body style, a caption style, and every place that uses it stays in step. Change the style once and every paragraph using it updates. This is what keeps a fifty-page report from drifting into a dozen slightly different heading looks, the classic frustration of formatting a long document by hand.

Backbuild Docs supports both paragraph styles (which format a whole paragraph) and character styles (which format a run of text inside a paragraph), plus linked styles: a single style with a paragraph half and a character half. Apply it to a whole paragraph and you get the paragraph formatting; apply it to a selection inside a paragraph and you get just the character formatting. A heading and its run-in variant stay defined together, so they never diverge.

Will my styles and formatting survive when I export? Yes. Headings, named styles, lists, tables, images, alignment, and spacing are carried into the exported file. Because the document has a real underlying structure rather than a pile of ad-hoc formatting, an export to Word or OpenDocument arrives with its styles intact rather than flattened. See Importing and Exporting for the format-by-format detail, including where a round-trip is lossy and why.

Paragraph and Page Formatting

After this section you will control the shape of a paragraph and the look of the page. Paragraph formatting covers alignment (left, right, center, justified), indentation, line spacing, spacing before and after a paragraph, borders and shading, a drop cap, text direction for right-to-left scripts, and line and legal numbering. Page-level formatting covers a page color, a page border, a watermark, headers and footers, page numbers and dates, and cover or blank pages.

Page Setup: Size, Orientation, and Margins

After this section you will set the physical page for print or for a pageless surface. Open Page Setup to control the page itself:

  • Page size: a catalog of US and ISO A and B sizes, or a custom size you type in.
  • Orientation: portrait or landscape.
  • Units: inches, millimeters, centimeters, points, or pixels. The ruler and every measurement follow the unit you choose.
  • Paged or pageless: switch between a paginated document with real page boundaries (for anything you will print or submit) and a continuous pageless surface (for a document that only ever lives on screen).

New documents start with one-inch margins. The margin you see on screen is the real document margin, not a preview approximation, so what you lay out is what prints.

The Page Setup dialog open over a document. Two controls are circled and numbered: 1, the paper-size selector set to Letter (8.5 by 11 in), labelled Page size, US and ISO sizes, or a custom size; and 2, the unit selector set to in, labelled Units, inches, mm, cm, points, or pixels. Below them are the orientation control, the four per-side margin fields, and a Pageless (continuous, no page breaks) checkbox.
Page Setup controls the physical page: a catalog of US and ISO sizes or a custom size, orientation, per-side margins, the measurement unit, and the paged-or-pageless toggle at the bottom.

The Ruler, Margins, and Indents

After this section you will adjust margins and indents by dragging, and trust the numbers. A live ruler runs along the top of the page. Its zero point is pinned to the page corner and stays correct as you zoom and pan, and its scale follows the unit you picked in Page Setup. Drag the margin handles to change the page margins, and the indent handles to change a paragraph's indentation, with a fine step (for example one-hundredth of an inch) so you can land on an exact measurement rather than a rough one.

A close-up of the horizontal ruler above a page. The zero point is pinned at the page corner. Shaded bands at each end mark the left and right margins, each with a draggable margin handle at its inner edge. At the start of the text area, two stacked triangles are the first-line indent handle on top and the hanging-indent handle below. A marker further along the ruler is a custom tab stop. The ruler scale follows the unit chosen in Page Setup.
The ruler and its handles. Drag the margin handles to set the page margins and the indent handles to set a paragraph's indentation; the zero point stays pinned at the page corner and the scale follows your chosen unit.

Multi-Column Text

After this section you will lay text out in newspaper-style columns. Set two, three, or four balanced columns, with a gap between them and an optional separator rule. Add or remove a column from the ruler's right-click menu, choose a column layout from the Insert menu, and insert a column break to push the following text to the top of the next column. Columns are what a newsletter, a brochure, or a two-column conference paper needs, and they flow and balance automatically as you edit.

Section Breaks

After this section you will change layout partway through a document. A section break splits a document into independently laid-out sections. Insert a next-page break to start the following section on a new page, or a continuous break to change layout without a page break, and give each section its own column count from one to four. A one-column introduction followed by a two-column body is a section break away. The break renders as a labelled divider so you can see where one section ends and the next begins.

Tab Stops

After this section you will align text into clean columns without a table. Pressing Tab advances the caret to the next tab stop. A default grid is in place out of the box, and you can set custom tab stops per paragraph on the ruler for precise alignment, for a signature block, a simple price list, or a form. Custom tab positions are a display convenience of the live document; if you export to LaTeX and back, custom tab positions are not preserved, so use a table where the alignment must survive every round-trip.

Mailing-Label and Badge Grids

After this section you will turn a page into a sheet of labels. From the Insert menu, choose Labels and pick an Avery preset (thirteen common templates are built in) to set the page up as that label or badge sheet with the right cell size and spacing. This is the fast path to printing a run of mailing labels or event badges from one document. The label-grid model is available now; per-cell editable rendering inside the grid and the in-labels ruler row and column handles are the remaining part of that build and are on the way. The rest of the page-layout capabilities on this page are shipped.

Can several people format the same document at once without stepping on each other? Yes. Formatting is just another kind of edit, and edits from every author merge automatically, so one person restyling headings while another types body text do not collide. See Collaboration and Sharing for how live co-editing works.

How do I get a PDF of my formatted document? Use File then Print and save as PDF through your browser or system print dialog. The document renders live as you write, so what you see is what prints. For a submission-ready LaTeX build for a journal or preprint, download the LaTeX source (a Backbuild Science capability); your journal or pipeline compiles it to PDF. Both paths are covered in Importing and Exporting.

Where to Go Next